Furnace Repair Toronto
  • Blog

Furnace Repair Toronto

Effective Ways To Reducing Indoor Humidity

7/28/2022

0 Comments

 

Too much humidity in the home can cause various problems, from respiratory issues to mould and mildew growth to damage to furniture and other possessions. Maintaining a comfortable humidity level and reducing indoor humidity is key to keeping your home healthy and preventing damage.

This article will explore practical ways to reduce indoor humidity, so read on.

Install an Air Conditioner

One of the most effective ways to reduce indoor humidity is to install an air conditioner. Air conditioners work by removing moisture from the air, which can help to lower the overall humidity level in your home. Regularly running your air conditioner can be an essential part of reducing indoor humidity if you live in a humid climate.

In hot and humid areas, air conditioners may be costly to operate. However, after the room or house reaches the desired temperature and the humidity has decreased, it is usually easier for the air conditioner to maintain the desired humidity and temperature levels.

Enhance The Ventilation In Your Home

Another way to reduce indoor humidity is to enhance the ventilation in your home. You can do this by opening windows and doors regularly to allow fresh air to circulate. Additionally, you can install exhaust fans in areas of your home that tend to be damp, such as the kitchen and bathroom.

Exhaust fans work by removing moisture-laden air from your home and venting it outside. It can help reduce the overall humidity level in your home and prevent mould and mildew growth.

Use a Dehumidifier

If you find that the humidity level in your home is still too high, even after taking steps to improve ventilation, you may need to use a dehumidifier. Dehumidifiers work by removing moisture from the air and can be an effective way to reduce indoor humidity levels.

Dehumidifiers come in various sizes, so it is vital to choose one that is appropriate for the size of your home. Additionally, you will need to empty the dehumidifier regularly, as the moisture will collect in the unit.

Take Cold Showers and Baths

Another way to reduce indoor humidity is to take cold showers and baths. When you take a hot shower, the steam produced can add moisture to the air, increasing indoor humidity levels. However, by taking cold showers or baths, you can help to reduce the amount of moisture in the air.

In addition to reducing indoor humidity, taking cold showers can have several other health benefits, such as improving circulation and reducing inflammation.

Reduce Moisture Sources

One of the best ways to reduce indoor humidity is to minimize moisture sources in your home. There are many ways to do this, including:

  • Fixing leaks and drips
  • Venting clothes dryers to the outside
  • Using an exhaust fan when cooking
  • Running a bathroom fan during showers
  • Keeping indoor plants well-watered

By reducing moisture sources in your home, you can help to prevent indoor humidity levels from rising. Additionally, this can help to prevent mould and mildew growth. Mould and mildew thrive in humid environments and can cause various problems, from respiratory issues to damage to your home. By reducing moisture sources, you can help to prevent mould and mildew growth.

Keep Surfaces and Rugs Dry

Another way to reduce indoor humidity is to keep surfaces and rugs dry. Moisture can build up on these surfaces, contributing to indoor humidity levels. Additionally, mould and mildew can grow on damp surfaces, so keeping them as dry as possible is important.

There are several ways to keep surfaces and rugs dry, including using a vacuum with a HEPA filter, fans to circulate air, and a dehumidifier. Additionally, you can try placing rugs and mats in areas that tend to be damp, such as the kitchen and bathroom.

Dry Your Laundry Outside

Laundry is one task that is a significant source of humidity in houses. It results from damp garments being hung inside, which exposes the house to moisture. Poor ventilation in specific spaces might exacerbate this problem. You may use a dryer to protect damp clothing from raising the humidity levels in your house, or you can just hang wet clothing outdoors to limit moisture exposure.

In addition to reducing indoor humidity, drying your laundry outside can also save you money, as you won’t have to run your clothes dryer as often. Additionally, it can help to extend the life of your clothes, as the heat from the dryer can cause them to fade and wear out over time.

Use a Humidistat

A humidistat is a device that measures the amount of moisture in the air. By using a humidistat, you can monitor indoor humidity levels and take steps to reduce them if necessary.

There are a variety of humidistats on the market, so it is essential to choose one that is appropriate for your needs. Additionally, you will need to calibrate the humidistat regularly to ensure accuracy.

Monitoring indoor humidity levels with a humidistat can help you to take steps to reduce them when necessary. Additionally, it can help you identify problems, such as leaks or excessive moisture that might contribute to high humidity levels.

Create A Basket Of Charcoal

Charcoal is a natural absorbent and can help to reduce indoor humidity levels. To create a basket of charcoal, simply place a layer of charcoal in the bottom of a basket and cover it with a layer of dried leaves or grass. Then, place the basket in areas prone to high humidity levels, such as the kitchen or bathroom.

The basket will help keep the charcoal in place, so you don’t have to worry about making a mess. It is also a natural and non-toxic solution that won’t harm your family or pets.

Conclusion

High indoor humidity levels can cause various problems, from respiratory issues to mould and mildew growth. Luckily, several ways to reduce indoor humidity include installing an air conditioner, using a dehumidifier, improving air circulation, and reducing moisture sources. Taking these steps can help keep your home comfortable and free of harmful mould and mildew.

You can contact Furnace Repair Toronto for a free consultation if you want to install an air conditioner. Our team of experts can help you to choose the right air conditioner for your needs and budget. We also offer various other HVAC services, including furnace repair, duct cleaning, and more. Give us a call today to learn more about what we can do for you.

The post Effective Ways To Reducing Indoor Humidity appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



via Blogger Effective Ways To Reducing Indoor Humidity
0 Comments

Effective Ways To Reducing Indoor Humidity

7/28/2022

0 Comments

 

Too much humidity in the home can cause various problems, from respiratory issues to mould and mildew growth to damage to furniture and other possessions. Maintaining a comfortable humidity level and reducing indoor humidity is key to keeping your home healthy and preventing damage.

This article will explore practical ways to reduce indoor humidity, so read on.

Install an Air Conditioner

One of the most effective ways to reduce indoor humidity is to install an air conditioner. Air conditioners work by removing moisture from the air, which can help to lower the overall humidity level in your home. Regularly running your air conditioner can be an essential part of reducing indoor humidity if you live in a humid climate.

In hot and humid areas, air conditioners may be costly to operate. However, after the room or house reaches the desired temperature and the humidity has decreased, it is usually easier for the air conditioner to maintain the desired humidity and temperature levels.

Enhance The Ventilation In Your Home

Another way to reduce indoor humidity is to enhance the ventilation in your home. You can do this by opening windows and doors regularly to allow fresh air to circulate. Additionally, you can install exhaust fans in areas of your home that tend to be damp, such as the kitchen and bathroom.

Exhaust fans work by removing moisture-laden air from your home and venting it outside. It can help reduce the overall humidity level in your home and prevent mould and mildew growth.

Use a Dehumidifier

If you find that the humidity level in your home is still too high, even after taking steps to improve ventilation, you may need to use a dehumidifier. Dehumidifiers work by removing moisture from the air and can be an effective way to reduce indoor humidity levels.

Dehumidifiers come in various sizes, so it is vital to choose one that is appropriate for the size of your home. Additionally, you will need to empty the dehumidifier regularly, as the moisture will collect in the unit.

Take Cold Showers and Baths

Another way to reduce indoor humidity is to take cold showers and baths. When you take a hot shower, the steam produced can add moisture to the air, increasing indoor humidity levels. However, by taking cold showers or baths, you can help to reduce the amount of moisture in the air.

In addition to reducing indoor humidity, taking cold showers can have several other health benefits, such as improving circulation and reducing inflammation.

Reduce Moisture Sources

One of the best ways to reduce indoor humidity is to minimize moisture sources in your home. There are many ways to do this, including:

  • Fixing leaks and drips
  • Venting clothes dryers to the outside
  • Using an exhaust fan when cooking
  • Running a bathroom fan during showers
  • Keeping indoor plants well-watered

By reducing moisture sources in your home, you can help to prevent indoor humidity levels from rising. Additionally, this can help to prevent mould and mildew growth. Mould and mildew thrive in humid environments and can cause various problems, from respiratory issues to damage to your home. By reducing moisture sources, you can help to prevent mould and mildew growth.

Keep Surfaces and Rugs Dry

Another way to reduce indoor humidity is to keep surfaces and rugs dry. Moisture can build up on these surfaces, contributing to indoor humidity levels. Additionally, mould and mildew can grow on damp surfaces, so keeping them as dry as possible is important.

There are several ways to keep surfaces and rugs dry, including using a vacuum with a HEPA filter, fans to circulate air, and a dehumidifier. Additionally, you can try placing rugs and mats in areas that tend to be damp, such as the kitchen and bathroom.

Dry Your Laundry Outside

Laundry is one task that is a significant source of humidity in houses. It results from damp garments being hung inside, which exposes the house to moisture. Poor ventilation in specific spaces might exacerbate this problem. You may use a dryer to protect damp clothing from raising the humidity levels in your house, or you can just hang wet clothing outdoors to limit moisture exposure.

In addition to reducing indoor humidity, drying your laundry outside can also save you money, as you won’t have to run your clothes dryer as often. Additionally, it can help to extend the life of your clothes, as the heat from the dryer can cause them to fade and wear out over time.

Use a Humidistat

A humidistat is a device that measures the amount of moisture in the air. By using a humidistat, you can monitor indoor humidity levels and take steps to reduce them if necessary.

There are a variety of humidistats on the market, so it is essential to choose one that is appropriate for your needs. Additionally, you will need to calibrate the humidistat regularly to ensure accuracy.

Monitoring indoor humidity levels with a humidistat can help you to take steps to reduce them when necessary. Additionally, it can help you identify problems, such as leaks or excessive moisture that might contribute to high humidity levels.

Create A Basket Of Charcoal

Charcoal is a natural absorbent and can help to reduce indoor humidity levels. To create a basket of charcoal, simply place a layer of charcoal in the bottom of a basket and cover it with a layer of dried leaves or grass. Then, place the basket in areas prone to high humidity levels, such as the kitchen or bathroom.

The basket will help keep the charcoal in place, so you don’t have to worry about making a mess. It is also a natural and non-toxic solution that won’t harm your family or pets.

Conclusion

High indoor humidity levels can cause various problems, from respiratory issues to mould and mildew growth. Luckily, several ways to reduce indoor humidity include installing an air conditioner, using a dehumidifier, improving air circulation, and reducing moisture sources. Taking these steps can help keep your home comfortable and free of harmful mould and mildew.

You can contact Furnace Repair Toronto for a free consultation if you want to install an air conditioner. Our team of experts can help you to choose the right air conditioner for your needs and budget. We also offer various other HVAC services, including furnace repair, duct cleaning, and more. Give us a call today to learn more about what we can do for you.

The post Effective Ways To Reducing Indoor Humidity appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



Via https://furnace-repair-toronto.ca/effective-ways-to-reducing-indoor-humidity/
0 Comments

Gas Furnace Maintenance Checklist

7/28/2022

0 Comments

 

A gas furnace is a vital part of any home during the colder months, and it’s crucial to ensure it’s well-maintained to keep your family warm and safe. A gas furnace maintenance checklist can help you stay on top of all the tasks you need to complete to keep your furnace running smoothly.

Here are some key things to include on your gas furnace maintenance checklist.

Replace The Filters

The primary purpose of the furnace air filter, which is often found in the return duct, is to prevent particles from entering your house. A cheap furnace air filter will only stop a small amount of dust and debris. Consequently, dust and debris will build up in your furnace, polluting the air inside your home.

The adversary of all HVAC systems, dust and dirt, must always be remembered. Your heating system won’t obtain enough air supply to maintain the correct temperature if dust and other small particles build up. Consequently, it will take longer for your heating system to provide the necessary temperature.

Once more, high-quality air filters for furnaces tend to block a wide variety of pollutants, including dust, pollens, trash, germs, etc.

Check The Flame Sensor

If your furnace is gas-powered, you’ll need to check the flame sensor from time to time. The flame sensor’s purpose is to ensure a gas flame is present when the furnace is turned on. If the sensor isn’t working correctly, it could prevent the gas valve from opening, preventing the furnace from turning.

To test the flame sensor, simply turn on the gas valve and then use a multimeter to test for continuity between the two terminals on the sensor. If there is no continuity, the sensor will need replacement.

Clean The Blower Assembly

The blower assembly is what circulates the air through your furnace and into your home. Over time, the blower assembly can become clogged with dust and debris, reducing efficiency. It’s essential to clean it regularly to keep the blower assembly running smoothly.

To clean the blower assembly, remove it from the furnace and then use a brush or vacuum to remove any dust and debris.

Inspect Gas and Electrical Connections

You’ll need to inspect the gas connections regularly if your furnace is gas-powered. Loose gas connections can be hazardous, so it’s crucial to ensure they’re tight and secure. You should also inspect the electrical connections to ensure they’re not loose or damaged.

Inspect the gas connections by looking for any leaks. If you see any gas leaks, you’ll need to have them repaired immediately. To inspect the electrical connections, simply use a multimeter to test for continuity between the terminals.

Clean The Burners

The burners are what heat the air that’s circulated through your furnace. Over time, the burners can become clogged with soot and debris, reducing their efficiency. It’s also essential to clean them regularly.

To clean the burners, remove them from the furnace and then use a brush or vacuum to remove any soot and debris.

Check Heat Exchanger

Only eye examinations are necessary for heat exchangers. Cracks, soot, and sounds are some warning indicators that an exchanger is experiencing problems and smells similar to formaldehyde. If you detect any of these, please shut off your gas furnace and contact a professional HVAC technician as soon as possible. Heat exchanger cracks can release carbon monoxide into the air, which can be extremely dangerous.

Inspect The Flue Pipe

The flue pipe carries the exhaust from the furnace out of your home. Over time, the flue pipe can become clogged with soot and debris, which can cause the furnace to overheat. Your home’s flue pipe is in charge of eliminating fuel byproducts. A professional will assess the fit and flow of your flue pipe. An improper installation can cause gas leaks and fires.

Check The Thermostat

The thermostat is what controls the temperature of your home. If the thermostat isn’t working properly, it can cause the furnace to overheat or not heat the home sufficiently. To test the thermostat, simply set it to a lower temperature and see if the furnace turns on. If it doesn’t, then you’ll need to replace the thermostat.

Conclusion

A gas furnace is a vital part of any home during the colder months, and it’s essential to ensure it’s well-maintained to keep your family warm and safe. A gas furnace maintenance checklist can help you stay on top of all the tasks needed to keep your furnace running smoothly. Furnace Repair Toronto should be your first call when you’re ready to book a gas furnace tune-up or if something goes wrong and you need gas furnace repair in Toronto.

If you have any questions about gas furnace maintenance or anything related to HVAC, feel free to contact us. One of our friendly and knowledgeable staff members would be happy to help you.

The post Gas Furnace Maintenance Checklist appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



source https://furnace-repair-toronto.ca/gas-furnace-maintenance-checklist/

via Blogger Gas Furnace Maintenance Checklist
0 Comments

Gas Furnace Maintenance Checklist

7/28/2022

0 Comments

 

A gas furnace is a vital part of any home during the colder months, and it’s crucial to ensure it’s well-maintained to keep your family warm and safe. A gas furnace maintenance checklist can help you stay on top of all the tasks you need to complete to keep your furnace running smoothly.

Here are some key things to include on your gas furnace maintenance checklist.

Replace The Filters

The primary purpose of the furnace air filter, which is often found in the return duct, is to prevent particles from entering your house. A cheap furnace air filter will only stop a small amount of dust and debris. Consequently, dust and debris will build up in your furnace, polluting the air inside your home.

The adversary of all HVAC systems, dust and dirt, must always be remembered. Your heating system won’t obtain enough air supply to maintain the correct temperature if dust and other small particles build up. Consequently, it will take longer for your heating system to provide the necessary temperature.

Once more, high-quality air filters for furnaces tend to block a wide variety of pollutants, including dust, pollens, trash, germs, etc.

Check The Flame Sensor

If your furnace is gas-powered, you’ll need to check the flame sensor from time to time. The flame sensor’s purpose is to ensure a gas flame is present when the furnace is turned on. If the sensor isn’t working correctly, it could prevent the gas valve from opening, preventing the furnace from turning.

To test the flame sensor, simply turn on the gas valve and then use a multimeter to test for continuity between the two terminals on the sensor. If there is no continuity, the sensor will need replacement.

Clean The Blower Assembly

The blower assembly is what circulates the air through your furnace and into your home. Over time, the blower assembly can become clogged with dust and debris, reducing efficiency. It’s essential to clean it regularly to keep the blower assembly running smoothly.

To clean the blower assembly, remove it from the furnace and then use a brush or vacuum to remove any dust and debris.

Inspect Gas and Electrical Connections

You’ll need to inspect the gas connections regularly if your furnace is gas-powered. Loose gas connections can be hazardous, so it’s crucial to ensure they’re tight and secure. You should also inspect the electrical connections to ensure they’re not loose or damaged.

Inspect the gas connections by looking for any leaks. If you see any gas leaks, you’ll need to have them repaired immediately. To inspect the electrical connections, simply use a multimeter to test for continuity between the terminals.

Clean The Burners

The burners are what heat the air that’s circulated through your furnace. Over time, the burners can become clogged with soot and debris, reducing their efficiency. It’s also essential to clean them regularly.

To clean the burners, remove them from the furnace and then use a brush or vacuum to remove any soot and debris.

Check Heat Exchanger

Only eye examinations are necessary for heat exchangers. Cracks, soot, and sounds are some warning indicators that an exchanger is experiencing problems and smells similar to formaldehyde. If you detect any of these, please shut off your gas furnace and contact a professional HVAC technician as soon as possible. Heat exchanger cracks can release carbon monoxide into the air, which can be extremely dangerous.

Inspect The Flue Pipe

The flue pipe carries the exhaust from the furnace out of your home. Over time, the flue pipe can become clogged with soot and debris, which can cause the furnace to overheat. Your home’s flue pipe is in charge of eliminating fuel byproducts. A professional will assess the fit and flow of your flue pipe. An improper installation can cause gas leaks and fires.

Check The Thermostat

The thermostat is what controls the temperature of your home. If the thermostat isn’t working properly, it can cause the furnace to overheat or not heat the home sufficiently. To test the thermostat, simply set it to a lower temperature and see if the furnace turns on. If it doesn’t, then you’ll need to replace the thermostat.

Conclusion

A gas furnace is a vital part of any home during the colder months, and it’s essential to ensure it’s well-maintained to keep your family warm and safe. A gas furnace maintenance checklist can help you stay on top of all the tasks needed to keep your furnace running smoothly. Furnace Repair Toronto should be your first call when you’re ready to book a gas furnace tune-up or if something goes wrong and you need gas furnace repair in Toronto.

If you have any questions about gas furnace maintenance or anything related to HVAC, feel free to contact us. One of our friendly and knowledgeable staff members would be happy to help you.

The post Gas Furnace Maintenance Checklist appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



Via https://furnace-repair-toronto.ca/gas-furnace-maintenance-checklist/
0 Comments

Gas Furnace Maintenance Checklist

7/28/2022

0 Comments

 

A gas furnace is a vital part of any home during the colder months, and it’s crucial to ensure it’s well-maintained to keep your family warm and safe. A gas furnace maintenance checklist can help you stay on top of all the tasks you need to complete to keep your furnace running smoothly.

Here are some key things to include on your gas furnace maintenance checklist.

Replace The Filters

The primary purpose of the furnace air filter, which is often found in the return duct, is to prevent particles from entering your house. A cheap furnace air filter will only stop a small amount of dust and debris. Consequently, dust and debris will build up in your furnace, polluting the air inside your home.

The adversary of all HVAC systems, dust and dirt, must always be remembered. Your heating system won’t obtain enough air supply to maintain the correct temperature if dust and other small particles build up. Consequently, it will take longer for your heating system to provide the necessary temperature.

Once more, high-quality air filters for furnaces tend to block a wide variety of pollutants, including dust, pollens, trash, germs, etc.

Check The Flame Sensor

If your furnace is gas-powered, you’ll need to check the flame sensor from time to time. The flame sensor’s purpose is to ensure a gas flame is present when the furnace is turned on. If the sensor isn’t working correctly, it could prevent the gas valve from opening, preventing the furnace from turning.

To test the flame sensor, simply turn on the gas valve and then use a multimeter to test for continuity between the two terminals on the sensor. If there is no continuity, the sensor will need replacement.

Clean The Blower Assembly

The blower assembly is what circulates the air through your furnace and into your home. Over time, the blower assembly can become clogged with dust and debris, reducing efficiency. It’s essential to clean it regularly to keep the blower assembly running smoothly.

To clean the blower assembly, remove it from the furnace and then use a brush or vacuum to remove any dust and debris.

Inspect Gas and Electrical Connections

You’ll need to inspect the gas connections regularly if your furnace is gas-powered. Loose gas connections can be hazardous, so it’s crucial to ensure they’re tight and secure. You should also inspect the electrical connections to ensure they’re not loose or damaged.

Inspect the gas connections by looking for any leaks. If you see any gas leaks, you’ll need to have them repaired immediately. To inspect the electrical connections, simply use a multimeter to test for continuity between the terminals.

Clean The Burners

The burners are what heat the air that’s circulated through your furnace. Over time, the burners can become clogged with soot and debris, reducing their efficiency. It’s also essential to clean them regularly.

To clean the burners, remove them from the furnace and then use a brush or vacuum to remove any soot and debris.

Check Heat Exchanger

Only eye examinations are necessary for heat exchangers. Cracks, soot, and sounds are some warning indicators that an exchanger is experiencing problems and smells similar to formaldehyde. If you detect any of these, please shut off your gas furnace and contact a professional HVAC technician as soon as possible. Heat exchanger cracks can release carbon monoxide into the air, which can be extremely dangerous.

Inspect The Flue Pipe

The flue pipe carries the exhaust from the furnace out of your home. Over time, the flue pipe can become clogged with soot and debris, which can cause the furnace to overheat. Your home’s flue pipe is in charge of eliminating fuel byproducts. A professional will assess the fit and flow of your flue pipe. An improper installation can cause gas leaks and fires.

Check The Thermostat

The thermostat is what controls the temperature of your home. If the thermostat isn’t working properly, it can cause the furnace to overheat or not heat the home sufficiently. To test the thermostat, simply set it to a lower temperature and see if the furnace turns on. If it doesn’t, then you’ll need to replace the thermostat.

Conclusion

A gas furnace is a vital part of any home during the colder months, and it’s essential to ensure it’s well-maintained to keep your family warm and safe. A gas furnace maintenance checklist can help you stay on top of all the tasks needed to keep your furnace running smoothly. Furnace Repair Toronto should be your first call when you’re ready to book a gas furnace tune-up or if something goes wrong and you need gas furnace repair in Toronto.

If you have any questions about gas furnace maintenance or anything related to HVAC, feel free to contact us. One of our friendly and knowledgeable staff members would be happy to help you.

The post Gas Furnace Maintenance Checklist appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



via Blogger Gas Furnace Maintenance Checklist
0 Comments

7 Step Oil Furnace Maintenance Checklist

7/27/2022

0 Comments

 

When winter is a few months away, oil furnaces are something people start to think about. If you’re like most people, you probably don’t think about your oil furnace all that often. But it’s important to remember that just like any other piece of equipment in your home, your furnace needs regular maintenance to keep it running smoothly. Here is an oil furnace maintenance checklist of things to do to keep your system in good shape.

Check Your Oil Furnace

Before beginning autumn furnace maintenance, you must first switch off your furnace. Fortunately, doing so is straightforward and often involves flipping a switch on and off. Before doing any furnace maintenance, it is essential to turn off its fuel supply and electrical power to ensure your safety and the safety of your property.

Ensure that the components of your oil furnace are in excellent condition and show no symptoms of leakage or apparent damage. Visually check all the lines going to and coming from your furnace and oil tank. Inspect the oil level in your oil furnace after making sure everything is in working order. Sludge starts to form in the tank whenever the oil level drops very low, and this sludge might subsequently block your filters, fuel line, and other equipment.

Clean or Replace Your Oil Furnace Filter

If your oil furnace has a clogged filter, it will have to work harder to push air through, leading to problems. A clean filter also prevents dust and debris from circulating through your home. Replacing or cleaning your furnace filter is one of the most important things you can do to maintain your oil furnace.

If you have a disposable filter, replace it according to the manufacturer’s instructions. If you have a reusable filter, clean it with warm soapy water and let it air-dry completely before putting it back in place.

Clean The Furnace’s Combustion Chamber

The combustion chamber is where oil is burned to create heat. Over time, soot and debris can build up in the chamber, leading to problems with your furnace. To clean the combustion chamber, you’ll need to remove the chamber cover and use a wire brush to scrub away any built-up debris.

Wear gloves and a dust mask to avoid breathing in soot and debris while cleaning the chamber. Once you’ve finished scrubbing, use a vacuum to remove any remaining debris from the chamber.

Inspect The Furnace’s Vent Pipe

The vent pipe is responsible for carrying combustion gases out of your home. If the vent pipe becomes blocked, it can cause severe problems with your furnace. To inspect the vent pipe, remove the cover from the pipe and look for any signs of blockages. If you see any debris in the pipe, use a brush to remove it.

Replace The Oil Filter

When was the last time you changed the oil filter in your furnace? If you’re unsure, replace it immediately to guarantee that your furnace will function appropriately throughout cold weather. The oil filter prevents small particles that may block the oil burner nozzle and cause the system to malfunction and shut off. It just takes a few minutes to change it, and you should do it at least twice every heating season.

Since it cleans oil before the fuel reaches the furnace, the oil filter is often placed near it. Replace the oil filter by unscrewing the old one and screwing in a new one. Make sure you don’t overtighten the filter, or you may damage the threads.

Clean Heat Exchanger

The heat exchanger is in the combustion chamber of your oil furnace. Its job is to transfer heat from the hot gases produced by burning oil to the air circulated through your home by the furnace’s blower. Over time, soot can build up on the heat exchanger, which can reduce its efficiency and cause problems with your furnace. Scrub the heat exchanger with a wire brush to remove any soot or debris that has built up on it. Wear gloves and a dust mask while cleaning the heat exchanger.

Test The Burners’ Efficiency

Ready to check the effectiveness of your burner? To achieve this, you must do a combustion analysis that measures the gases in the exhaust flue and determines the furnace’s efficiency. The analysis will also help you determine if the furnace produces harmful gases like carbon monoxide.

If you’re not comfortable performing a combustion analysis, you can hire a professional to do it for you. Experts will be able to tell you if your furnace is operating efficiently and whether or not it needs maintenance.

Conclusion

An oil furnace is essential to your home, and you should ensure it’s running correctly. Following this oil furnace maintenance checklist can keep your furnace in good shape and avoid costly repairs. Be sure to perform these maintenance tasks at least once every year to keep your furnace running smoothly. Don’t forget to schedule a tune-up with a professional before the cold weather hits to ensure your furnace is in good condition.

The post 7 Step Oil Furnace Maintenance Checklist appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



via Blogger 7 Step Oil Furnace Maintenance Checklist
0 Comments

7 Step Oil Furnace Maintenance Checklist

7/27/2022

0 Comments

 

When winter is a few months away, oil furnaces are something people start to think about. If you’re like most people, you probably don’t think about your oil furnace all that often. But it’s important to remember that just like any other piece of equipment in your home, your furnace needs regular maintenance to keep it running smoothly. Here is an oil furnace maintenance checklist of things to do to keep your system in good shape.

Check Your Oil Furnace

Before beginning autumn furnace maintenance, you must first switch off your furnace. Fortunately, doing so is straightforward and often involves flipping a switch on and off. Before doing any furnace maintenance, it is essential to turn off its fuel supply and electrical power to ensure your safety and the safety of your property.

Ensure that the components of your oil furnace are in excellent condition and show no symptoms of leakage or apparent damage. Visually check all the lines going to and coming from your furnace and oil tank. Inspect the oil level in your oil furnace after making sure everything is in working order. Sludge starts to form in the tank whenever the oil level drops very low, and this sludge might subsequently block your filters, fuel line, and other equipment.

Clean or Replace Your Oil Furnace Filter

If your oil furnace has a clogged filter, it will have to work harder to push air through, leading to problems. A clean filter also prevents dust and debris from circulating through your home. Replacing or cleaning your furnace filter is one of the most important things you can do to maintain your oil furnace.

If you have a disposable filter, replace it according to the manufacturer’s instructions. If you have a reusable filter, clean it with warm soapy water and let it air-dry completely before putting it back in place.

Clean The Furnace’s Combustion Chamber

The combustion chamber is where oil is burned to create heat. Over time, soot and debris can build up in the chamber, leading to problems with your furnace. To clean the combustion chamber, you’ll need to remove the chamber cover and use a wire brush to scrub away any built-up debris.

Wear gloves and a dust mask to avoid breathing in soot and debris while cleaning the chamber. Once you’ve finished scrubbing, use a vacuum to remove any remaining debris from the chamber.

Inspect The Furnace’s Vent Pipe

The vent pipe is responsible for carrying combustion gases out of your home. If the vent pipe becomes blocked, it can cause severe problems with your furnace. To inspect the vent pipe, remove the cover from the pipe and look for any signs of blockages. If you see any debris in the pipe, use a brush to remove it.

Replace The Oil Filter

When was the last time you changed the oil filter in your furnace? If you’re unsure, replace it immediately to guarantee that your furnace will function appropriately throughout cold weather. The oil filter prevents small particles that may block the oil burner nozzle and cause the system to malfunction and shut off. It just takes a few minutes to change it, and you should do it at least twice every heating season.

Since it cleans oil before the fuel reaches the furnace, the oil filter is often placed near it. Replace the oil filter by unscrewing the old one and screwing in a new one. Make sure you don’t overtighten the filter, or you may damage the threads.

Clean Heat Exchanger

The heat exchanger is in the combustion chamber of your oil furnace. Its job is to transfer heat from the hot gases produced by burning oil to the air circulated through your home by the furnace’s blower. Over time, soot can build up on the heat exchanger, which can reduce its efficiency and cause problems with your furnace. Scrub the heat exchanger with a wire brush to remove any soot or debris that has built up on it. Wear gloves and a dust mask while cleaning the heat exchanger.

Test The Burners’ Efficiency

Ready to check the effectiveness of your burner? To achieve this, you must do a combustion analysis that measures the gases in the exhaust flue and determines the furnace’s efficiency. The analysis will also help you determine if the furnace produces harmful gases like carbon monoxide.

If you’re not comfortable performing a combustion analysis, you can hire a professional to do it for you. Experts will be able to tell you if your furnace is operating efficiently and whether or not it needs maintenance.

Conclusion

An oil furnace is essential to your home, and you should ensure it’s running correctly. Following this oil furnace maintenance checklist can keep your furnace in good shape and avoid costly repairs. Be sure to perform these maintenance tasks at least once every year to keep your furnace running smoothly. Don’t forget to schedule a tune-up with a professional before the cold weather hits to ensure your furnace is in good condition.

The post 7 Step Oil Furnace Maintenance Checklist appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



source https://furnace-repair-toronto.ca/7-step-oil-furnace-maintenance-checklist/

via Blogger 7 Step Oil Furnace Maintenance Checklist
0 Comments

7 Step Oil Furnace Maintenance Checklist

7/27/2022

0 Comments

 

When winter is a few months away, oil furnaces are something people start to think about. If you’re like most people, you probably don’t think about your oil furnace all that often. But it’s important to remember that just like any other piece of equipment in your home, your furnace needs regular maintenance to keep it running smoothly. Here is an oil furnace maintenance checklist of things to do to keep your system in good shape.

Check Your Oil Furnace

Before beginning autumn furnace maintenance, you must first switch off your furnace. Fortunately, doing so is straightforward and often involves flipping a switch on and off. Before doing any furnace maintenance, it is essential to turn off its fuel supply and electrical power to ensure your safety and the safety of your property.

Ensure that the components of your oil furnace are in excellent condition and show no symptoms of leakage or apparent damage. Visually check all the lines going to and coming from your furnace and oil tank. Inspect the oil level in your oil furnace after making sure everything is in working order. Sludge starts to form in the tank whenever the oil level drops very low, and this sludge might subsequently block your filters, fuel line, and other equipment.

Clean or Replace Your Oil Furnace Filter

If your oil furnace has a clogged filter, it will have to work harder to push air through, leading to problems. A clean filter also prevents dust and debris from circulating through your home. Replacing or cleaning your furnace filter is one of the most important things you can do to maintain your oil furnace.

If you have a disposable filter, replace it according to the manufacturer’s instructions. If you have a reusable filter, clean it with warm soapy water and let it air-dry completely before putting it back in place.

Clean The Furnace’s Combustion Chamber

The combustion chamber is where oil is burned to create heat. Over time, soot and debris can build up in the chamber, leading to problems with your furnace. To clean the combustion chamber, you’ll need to remove the chamber cover and use a wire brush to scrub away any built-up debris.

Wear gloves and a dust mask to avoid breathing in soot and debris while cleaning the chamber. Once you’ve finished scrubbing, use a vacuum to remove any remaining debris from the chamber.

Inspect The Furnace’s Vent Pipe

The vent pipe is responsible for carrying combustion gases out of your home. If the vent pipe becomes blocked, it can cause severe problems with your furnace. To inspect the vent pipe, remove the cover from the pipe and look for any signs of blockages. If you see any debris in the pipe, use a brush to remove it.

Replace The Oil Filter

When was the last time you changed the oil filter in your furnace? If you’re unsure, replace it immediately to guarantee that your furnace will function appropriately throughout cold weather. The oil filter prevents small particles that may block the oil burner nozzle and cause the system to malfunction and shut off. It just takes a few minutes to change it, and you should do it at least twice every heating season.

Since it cleans oil before the fuel reaches the furnace, the oil filter is often placed near it. Replace the oil filter by unscrewing the old one and screwing in a new one. Make sure you don’t overtighten the filter, or you may damage the threads.

Clean Heat Exchanger

The heat exchanger is in the combustion chamber of your oil furnace. Its job is to transfer heat from the hot gases produced by burning oil to the air circulated through your home by the furnace’s blower. Over time, soot can build up on the heat exchanger, which can reduce its efficiency and cause problems with your furnace. Scrub the heat exchanger with a wire brush to remove any soot or debris that has built up on it. Wear gloves and a dust mask while cleaning the heat exchanger.

Test The Burners’ Efficiency

Ready to check the effectiveness of your burner? To achieve this, you must do a combustion analysis that measures the gases in the exhaust flue and determines the furnace’s efficiency. The analysis will also help you determine if the furnace produces harmful gases like carbon monoxide.

If you’re not comfortable performing a combustion analysis, you can hire a professional to do it for you. Experts will be able to tell you if your furnace is operating efficiently and whether or not it needs maintenance.

Conclusion

An oil furnace is essential to your home, and you should ensure it’s running correctly. Following this oil furnace maintenance checklist can keep your furnace in good shape and avoid costly repairs. Be sure to perform these maintenance tasks at least once every year to keep your furnace running smoothly. Don’t forget to schedule a tune-up with a professional before the cold weather hits to ensure your furnace is in good condition.

The post 7 Step Oil Furnace Maintenance Checklist appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



Via https://furnace-repair-toronto.ca/7-step-oil-furnace-maintenance-checklist/
0 Comments

How to Size A Furnace Properly

7/27/2022

0 Comments

 

We want to feel cozy inside our house when it’s freezing outside. Nothing is more crucial to ensuring comfort in the winter than a furnace. However, the furnace must be the correct size to operate well. Knowing how to size a furnace is vital in deciding when it’s time for installation or a replacement.

Follow our thorough instructions on precisely determining the best furnace size for your home to avoid these hassles.

Measure Your Home’s Square Footage

The first step is to measure the square footage of your home. It is crucial to note that you are under no obligation to measure for spaces without vents or for spaces you do not intend to heat.

To do this, you’ll need to measure the length and width of each room and multiply those numbers. For example, if a room is 10 feet wide by 12 feet long, its square footage would be 120. Then, add up all the square footage for each room in your house to determine how much space you need to heat.

For example, if your home has the following dimensions:

– 10 x 12 living room

– 15 x 20 family room

– 12 x 12 kitchen

– 30 x 30 garage

The total square footage of your home would be 1,080 square feet (120 + 300 + 144 + 900).

Determine the BTUs Per Square Foot 

The next step is determining how many BTUs (British Thermal Units) of heat you need per square foot. BTU is a measurement unit that quantifies your furnace’s heat output.

For newer homes, 30 to 35 BTUs per square foot is typical. Living in an older home may need as many as 45 BTUs per square foot. And, if any of your rooms have high ceilings (over 8 feet), you’ll need to add 600 BTUs for each room.

We’ll need 30 to 35 BTUs per square foot for our example home. That means we’ll need between 324 and 378 BTUs per square foot (1,080 x 0.3 = 324; 1,080 x 0.35 = 378).

Consider The Climate

When sizing your furnace, you’ll also need to consider the climate. In a milder climate, you can get away with fewer BTUs. However, you’ll need more BTUs to heat your home in a colder climate.

For instance, if you live in Toronto, you’ll only need between 35 and 45 BTUs per square foot. But, if you live in Winnipeg, you’ll need between 40 and 50 BTUs per square foot.

In our example home, we’ll need between 35 and 45 BTUs per square foot because we live in a milder climate.

Consider Other Factors

You’ll need to consider a few other factors when sizing your furnace.

  • Ceiling height: If your ceilings are above 8 feet, you’ll need to add 600 BTUs per square foot.
  • The number of windows: More windows means more heat loss. For every window in a room, add 1,000 BTUs.
  • Doors: Just like windows, doors can also lead to heat loss. Add 400 BTUs for each door in a room.
  • Ceiling fans: Ceiling fans can help circulate heat, so you may be able to reduce the size of your furnace if you have them.
  • Desired temperature: If you like your home to be warmer than most, you’ll need a bigger furnace.
  • Ductwork: The size of your ductwork and furnace may not be compatible, which might lead to issues. For example, if your furnace’s ductwork is too small, the furnace’s lifetime will be shortened since the air that the furnace generates won’t have enough room to pass through. As a result, the airflow will be restricted, leading to an overheated furnace. Ensure that the furnace you choose fits your ducting properly.
  • The number of people in the house: Because the human body radiates heat into the air around it, it will need fewer BTUs to heat if it often accommodates many people.

Conclusion

When it comes to sizing a furnace, there are several factors you’ll need to consider, including the square footage of your home, the climate, and other features like windows and doors. By considering all these things, you can be sure to choose a furnace that’s the right size for your home. If you need assistance, contact a furnace specialist. They can help you determine the perfect size for your needs.

Contact Furnace Repair Toronto for all your furnace repair and replacement needs in the GTA. We are a team of certified technicians serving the Greater Toronto Area for many years. Our team is available 24/7 for emergency services. Call us today!

The post How to Size A Furnace Properly appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



via Blogger How to Size A Furnace Properly
0 Comments

How to Size A Furnace Properly

7/27/2022

0 Comments

 

We want to feel cozy inside our house when it’s freezing outside. Nothing is more crucial to ensuring comfort in the winter than a furnace. However, the furnace must be the correct size to operate well. Knowing how to size a furnace is vital in deciding when it’s time for installation or a replacement.

Follow our thorough instructions on precisely determining the best furnace size for your home to avoid these hassles.

Measure Your Home’s Square Footage

The first step is to measure the square footage of your home. It is crucial to note that you are under no obligation to measure for spaces without vents or for spaces you do not intend to heat.

To do this, you’ll need to measure the length and width of each room and multiply those numbers. For example, if a room is 10 feet wide by 12 feet long, its square footage would be 120. Then, add up all the square footage for each room in your house to determine how much space you need to heat.

For example, if your home has the following dimensions:

– 10 x 12 living room

– 15 x 20 family room

– 12 x 12 kitchen

– 30 x 30 garage

The total square footage of your home would be 1,080 square feet (120 + 300 + 144 + 900).

Determine the BTUs Per Square Foot 

The next step is determining how many BTUs (British Thermal Units) of heat you need per square foot. BTU is a measurement unit that quantifies your furnace’s heat output.

For newer homes, 30 to 35 BTUs per square foot is typical. Living in an older home may need as many as 45 BTUs per square foot. And, if any of your rooms have high ceilings (over 8 feet), you’ll need to add 600 BTUs for each room.

We’ll need 30 to 35 BTUs per square foot for our example home. That means we’ll need between 324 and 378 BTUs per square foot (1,080 x 0.3 = 324; 1,080 x 0.35 = 378).

Consider The Climate

When sizing your furnace, you’ll also need to consider the climate. In a milder climate, you can get away with fewer BTUs. However, you’ll need more BTUs to heat your home in a colder climate.

For instance, if you live in Toronto, you’ll only need between 35 and 45 BTUs per square foot. But, if you live in Winnipeg, you’ll need between 40 and 50 BTUs per square foot.

In our example home, we’ll need between 35 and 45 BTUs per square foot because we live in a milder climate.

Consider Other Factors

You’ll need to consider a few other factors when sizing your furnace.

  • Ceiling height: If your ceilings are above 8 feet, you’ll need to add 600 BTUs per square foot.
  • The number of windows: More windows means more heat loss. For every window in a room, add 1,000 BTUs.
  • Doors: Just like windows, doors can also lead to heat loss. Add 400 BTUs for each door in a room.
  • Ceiling fans: Ceiling fans can help circulate heat, so you may be able to reduce the size of your furnace if you have them.
  • Desired temperature: If you like your home to be warmer than most, you’ll need a bigger furnace.
  • Ductwork: The size of your ductwork and furnace may not be compatible, which might lead to issues. For example, if your furnace’s ductwork is too small, the furnace’s lifetime will be shortened since the air that the furnace generates won’t have enough room to pass through. As a result, the airflow will be restricted, leading to an overheated furnace. Ensure that the furnace you choose fits your ducting properly.
  • The number of people in the house: Because the human body radiates heat into the air around it, it will need fewer BTUs to heat if it often accommodates many people.

Conclusion

When it comes to sizing a furnace, there are several factors you’ll need to consider, including the square footage of your home, the climate, and other features like windows and doors. By considering all these things, you can be sure to choose a furnace that’s the right size for your home. If you need assistance, contact a furnace specialist. They can help you determine the perfect size for your needs.

Contact Furnace Repair Toronto for all your furnace repair and replacement needs in the GTA. We are a team of certified technicians serving the Greater Toronto Area for many years. Our team is available 24/7 for emergency services. Call us today!

The post How to Size A Furnace Properly appeared first on Furnace Repair Toronto | 24 Hour Emergency Heating.



source https://furnace-repair-toronto.ca/how-to-size-a-furnace-properly/

via Blogger How to Size A Furnace Properly
0 Comments
<<Previous
Forward>>

    Archives

    January 2020

    Categories

    All

    RSS Feed

Powered by Create your own unique website with customizable templates.
  • Blog